Do you want your Netgear extender to function well 24×7 after WiFi extender setup? Are you answering in yes to that question? Well then, you have paved your way to the right post. Here, we have mentioned the guidelines following which performing Netgear extender firmware update via mywifiext.net will become a walk in the park for you. So, stick to reading without wasting any more time.
How to Do Netgear Extender Firmware Update?
1. Turn On the Extender
Initiate the Netgear firmware update process by plugging your extender into a wall outlet. Ensure that the power or socket is not damaged from anywhere. Once assured, turn on the device by pressing the power button.
2. Connect the Extender to the Router
Use the quality Ethernet cable. Insert one end of the cable to the router and another to the Netgear wireless range extender. The Ethernet cable currently in use should not have any deep cuts. Also, it should not be worn out. Otherwise, you will face difficulties in updating the firmware of your Netgear wireless range extender. And if that happens, you will not be able to enjoy an enhanced performance of your networking device.
3. Open an Internet Browser
Switch on your system [computer or laptop]. Which is the web browser that you usually use? Is it Google Chrome or Mozilla Firefox? Well, whichever it is, open it. See to it that it is not functioning on an outdated version. Also, its history and cache should be cleared.
4. Visit Mywifiext.net
Now, you are required to access mywifiext.net. And for that, you need to locate the location bar of your web browser. Once you find it, input mywifiext.net into it and press Enter. Soon, you will find yourself on the official login window of your range extender.
5. Perform Netgear Extender Login
Once you have accessed the login portal, you need to put the default admin login details of your extender to use. Once done, click on the Log In button. The Netgear WiFi extender setup wizard will appear in front of you.
6. Update Extender Firmware
Locate the Settings menu on the wizard. Once you find it, click on it and select the Administration option. Thereafter, click the Firmware Update button and wait for your Netgear wireless range extender to reboot. Once your device is done restarting, the firmware update process will come to an end.
Although performing Netgear extender firmware update is not rocket science, but, various users experience issues during the process. Are you one of them? If yes, then you should not waste any more time in going through the following hacks.
Netgear Extender Firmware Update Failed? What to Check?
Power Supply
Check if your Netgear range extender is getting an adequate power supply from its socket. In case, it is not, then you need to plug your extender into a different one.
Ethernet Connection
The Ethernet cable that has been used to connect both your networking devices should be properly connected to their Ethernet ports.
Web Address
Check the web address that you have entered. If you find out that there are typing errors in it, then it is recommended that you type the web address again.
WiFi Interference
In case smart home appliances and reflexive surfaces are kept near your Netgear range extender, it is recommended that you change its location.
Distance
If you have not placed your extender near the host router, then it is high time that you do now. But, do not place them too close to each other. Or else, their signals will clash.
After following these troubleshooting hacks, try to update the firmware of your Netgear wireless range extender.
The Bottom Line
Performing Netgear extender firmware update is important if you want to enhance the performance of your device and fix bugs and errors. We expect that with the help of the steps given above, you will be able to carry on this process in a hassle-free manner. By any chance, if you are unable to fix the issue at hand, then it is recommended that you reset the networking device. As soon as that is done, setup WiFi extender either using the method given above or the WPS method.
