Wavlink has become one of the most popular networking brands due to its phenomenal product line. Be they Wavlink drivers or other networking devices (routers or extenders) brought in by the company, users are having wonderful online experiences with their help. However, there exist a proportion of users who are quite unhappy with their Wavlink routers. The reason being, their WiFi routers are blinking red. Are you also tired of facing the same problem with your WiFi router? If yes, then the information shared in this write-up can help you out.
Here, we have jotted down several troubleshooting techniques following which you will be able to get rid of the red light problem with your Wavlink device. However, before you get down to them, we suggest you ensure that your router is getting a stable power supply.
Before Anything Else: Ensure Stable Power Supply
If the power being supplied to your WiFi router is unstable, then the occurrence of the red light problem is just the beginning. Therefore, you are suggested to have a look at the socket that is doing the power supply job. It is supposed to be free of any damage. Just in case you find any damage, get it repaired to fix the problem at hand. You can also take an easier route of powering up the WiFi device using another wall outlet. However, while doing so, ensure that your WiFi router stays in the range of the signals emitted by your modem.
Know that the power-related issue can also occur from the backend thereby forcing your Wavlink router to blink red. To get them fixed, it is advised to put a UPS to use. It will prevent hardware damage to the router due to sudden power outages.
In case everything is fine with the power, you are suggested to try your hands on the techniques that are discussed further in the post. This is to inform you that implementing some of them may require you to use the Wavlink router login details. So, keep them handy.
Wavlink Router Blinking Red: Other Solutions
Check the Ethernet Cable in Use
Have a look at the Ethernet cable which is currently connecting the Wavlink wireless router to the existing modem. In case, you find out that it is damaged, then it is recommended that you replace it with a new one. Although this will work for you in troubleshooting the Wavlink router red light, on the off chance, it does not; it is recommended that you put a wireless source of connection to use. This didn’t work for you either? Well then, follow the next troubleshooting tip in line.
Place the WiFi Devices in Proximity
Another reason why the LED light on your Wavlink wireless router is blinking red is because the distance between them is more than required. This can be eliminated if you place the devices close to each other. However, at the same time, ensure that the space is not too less. Or else the signals emitted from your devices will clash, thereby causing more technical issues in the future. And if that happens, then you can forget about troubleshooting the issue at hand.
Reboot the Wavlink Router
Now you should try rebooting your Wavlink router to fix the red light. It is seen that 8 out of 10 users were able to fix this issue by restarting their devices. Moreover, by doing this you can also fix the minor bugs and remove the temporary hiccups from the router.
Here are the steps to restart the router perfectly:
-
First, power off the router by pressing the turn-on button.
-
Second, remove the power cable from the router.
-
Third, wait for at least 5 minutes until the device recovers from hiccups.
-
Fourth, turn on it by plugging it into the socket.
Now your device has been rebooted successfully.
In case you still face a red light on your router, then reset your device because this hack will surely help you to fix it. Once the router is reset you need to perform the Wavlink setup again by accessing the default web address.
Conclusion
Now you know the reasons why your Wavlink router shows red light. To fix this you just need to implement the above-mentioned troubleshooting tips that work effectively.