Protecting Your iPhone from Water Damage: Tips and Tricks

iphone water damage

It’s no secret that our phones are constant companions in our daily lives. This omnipresence, while convenient, can leave our devices exposed to various potential hazards – one of the biggest being water. Certain conditions and exposure to water can cause extreme damage to your iPhone, sometimes leaving it irreparable. Therefore, it’s essential to understand the significance of protecting your iPhone from water damage.

The Importance of Protecting Your iPhone from Water Damage

Apple experts have spoken and their advice is clear: it’s crucial to be vigilant in protecting your iPhone from water damage. A few wrong moves can leave your device beyond repair. Although some iPhones are waterproof, they can only withstand submersion to particular extents and for a specific amount of time (IP68 and IP67 ratings). Despite that, there are several preventative measures you can take to reduce the risk and potential for water damage.

Here are some key insights from experts:

  • Invest in a waterproof pouch or case for additional protection.
  • Avoid water exposure or submersion if possible.

Remember, prevention is better than cure. Stay tuned to learn more useful tips and tricks to protect your iPhone from water damage.

Avoiding Water Damage

To keep your iPhone running smoothly, it’s critical to avoid water damage. While some iPhone models have water resistance specifications, remember that it doesn’t equate to them being fully waterproof. Here are some tips to protect your iPhone from water damage.

Keep Your iPhone Away from Water Sources

Preventing water damage starts by keeping the iPhone away from potential sources of water. Avoid using your device near pools, sinks, or exposed containers. If participating in water-related activities such as swimming or boating, it’s advisable to store your phone in a safer, drier area.

Use Waterproof Cases and Covers

Investing in a quality waterproof case or cover is a smart and effective way to prevent water damage. These cases offer an extra layer of protection to your iPhone, helping safeguard it against potential water-related accidents.

Be Cautious in Humid Environments

Lastly, remember to be extra cautious when using your iPhone in humid conditions, as humidity can lead to condensation and resulting water damage. If possible, avoid using and storing your device in such environments.

These simple steps can significantly reduce the risk of water damage to your iPhone and extend its longevity.

Tips for Water-Related Emergencies

Having a water-resistant iPhone does make a significant difference when dealing with water-related incidents. However, there are some additional steps you can take to help protect your device.

What to Do if Your iPhone Gets Wet

Firstly, it’s crucial not to panic. Modern iPhones are designed with water resistance in mind, surviving submersion in up to 1 to 2 meters of water for a maximum of 30 minutes. If your iPhone gets wet, wipe it gently with clean material, paying particular attention to its switches and crevices.

Quick Steps to Save Your Wet iPhone

After drying, remove any protective layer on your device. Your iPhone doesn’t need any liquid trapped between its chassis and the case. Let it air dry for faster recovery.

Using Rice to Dry Out Your iPhone

A popular DIY solution is to submerge the wet iPhone in a bag of uncooked rice. The rice supposedly acts as a desiccant, absorbing moisture from the device.

Using Silica Gel Packets for Drying

Alternatively, using silica gel packets can be more effective at absorbing moisture than rice. Simply stick your device in a container with as many packets as possible and wait 24-48 hours before attempting to turn it on.

Prevention Measures

Preventing water damage to your iPhone should be at the top of your list to extend its lifespan. Let’s discuss a few crucial prevention measures that can ensure your iPhone stays protected.

Regularly Check for Water Resistance

It’s essential to keep in mind that water resistance is not a permanent attribute of iPhones; it decreases over time due to regular wear and tear. You can understand more about the water resistance capacities of different iPhone models by clicking here. Always remember that even the highest-rated IP68 can only withstand being submerged in certain depths for limited periods.

Avoiding Excessive Heat and Cold

Temperature extremes can be equally harmful to your iPhone. Overheating, often caused by actions such as blow-drying your wet iPhone, can lead to internal damage, while excessive cold can potentially affect the battery life.

Following these prevention methods will assist in keeping your iPhone safer, thus enhancing its longevity.

Signs of Water Damage

Water damage to an iPhone might not be automatically evident, but there are signs that can indicate your phone may have been exposed to liquid.

Common Indicators of Water Damage

The most common indicators include erratic behavior from your phone such as unexpected shutdowns, touchscreen issues, and charging difficulties. Interestingly, another viable indicator is the liquid contact indicator (LCI), which, when in contact with water changes to a visible red color. The LCI can be found inside the SIM card tray.

What to Do if You Suspect Water Damage

If you suspect your iPhone has suffered water damage, immediately power off the device. This might prevent further damage to its electronic components. Then:

  • Quickly remove it from the wet area.
  • Wipe it down with a dry, lint-free, absorbent cloth.
  • Remove any case and the SIM card tray to allow moisture to escape.
  • If possible, leave the iPhone in a dry area for at least 48 hours to thoroughly dry out.

Coupled with the abovementioned tips, the AppleCare+ service provides additional protection and repair options for liquid damage. Remember: prevention is always better than cure!


The pervasiveness of smartphones in our everyday lives underscores the importance of safeguarding them from potential damage. An iPhone, for instance, can be especially susceptible to water damage, given its constant use and exposure to different environments.

Key Takeaways for Protecting Your iPhone from Water Damage:

  • Invest in a waterproof case: Opting for a high-quality waterproof case can offer a significant level of protection. Notably, it should be specifically designed for your iPhone model with a high waterproof rating.
  • Keep a safe distance from water bodies: Be cautious with your device around pools, sinks, open containers, and outdoor environments, especially during rain or near bodies of water.
  • Avoid intentional submersion: Regardless of the water-resistant features of newer iPhone models, remember they are not entirely waterproof.
  • If wet, act fast: Swift action can mitigate potential water damage. If your phone gets wet, wipe it dry, turn it off, and let it air dry in a well-ventilated area.

By adhering to these simple precautions, detailed in our previous blog posts, you can significantly reduce the probability of water damaging your iPhone. Be sure to stay vigilant and take the necessary steps to protect your device.

When a part needs to be replaced on an iPhone, it can be difficult to locate good iPhone parts. REPART is one of the leading manufacturers and suppliers of iPhone replacement parts. If your iPhone has been broken or damaged, you can purchase original quality replacement parts from REPART.


Max Pal

Max Pal

Max Pal is a passionate writer with a keen interest in technology. He has always been fascinated by the latest advancements in the tech industry and strives to provide up-to-date information to his readers. Max enjoys writing about various tech-related topics, including gadgets, software, and emerging technologies.

Leave a Reply

Your email address will not be published. Required fields are marked *