Many users who own Netgear Orbi routers have reported experiencing the Netgear Orbi keeps rebooting issue due to which they are unable to access orbilogin.net. In case you are also stuck with the same issue with your networking device, then it might be due to various reasons. But, let us not get into that. Instead, you should learn how to get rid of the issue. The same can be done if little attention is paid to the tips mentioned in this article. With that said, you ought to continue reading.
Before you continue, we would like to tell you that if you fail to understand any tip, re-read it. Avoid panicking. Otherwise, you might not be able to fix the issue.
[Fixed] Netgear Orbi Router Keeps Rebooting Issue
1. Let the Netgear Orbi Router Rest
The troubleshooting process can be started once you let the Orbi rest. For this, you have got to hit the power button on the router and hold on for 30 SECONDS. In case you want better results, then wait for up to 5 MINUTES. This will give your networking device enough time to recharge. Now, check if your device has stopped rebooting or not after powering it up. In case, you are still losing your mind because of the same issue, then it is recommended that you walk through the next hack in line.
2. Check the Wireless Connection
There is a possibility that you have connected your router and the modem wirelessly due to which the router keeps rebooting as a wireless source of connection is not a reliable source. But, now that you have already used this source, the least that can be done from your end is to maintain a safe distance between the devices. This means that they should neither be kept too close nor too far.
3. Sync the Orbi Devices Again
In case you are still experiencing the Netgear Orbi router keeps rebooting issue, then it is because your Orbi router and the satellite are not synced properly. This might be because the SYNC BUTTON is not pressed on either of the devices. Therefore, sync the Orbi devices once again. To do this, you need to first press the button on the router and then the satellite. Now, wait for some time and let the SYNC LED light turn solid.
4. Clean the Orbi Router Ports
Considering devices have ports located on them, if even one of them gets accumulated with dust, your device might cause issues. Chances are that the exact thing is what led to the issue at hand. In this case, you need to clean the ports of your router. You can go about this thing by using an ear bird or a piece of cloth. Once done, check again if you can resolve the Netgear Orbi keeps rebooting issue. In case not, you already know what to do.
5. Factory Reset the Netgear Orbi
Resetting the device is the last resort when it comes to troubleshooting technical issues. Viewing that you are still a victim of the Netgear Orbi keeps rebooting issue means that this is the only hack left for you to implement. To reset or restore your router to its default factory settings, you need to press the RESET button located on it using an oil pin and wait for a couple of seconds. After the reset process ends, set up the device via the Orbi app. If you face the Netgear Orbi app not working issue during the process, use another method.
Conclusion
These were the troubleshooting tips through which the Orbi keeps rebooting issue can be resolved. We hope that with the help of the tips mentioned above, you will easily be able to fix the issue that you were experiencing with the device. While learning how to resolve the issue at hand, if you figured out some other way that can be used to fix it, then it is recommended that you share it with your fellow readers. They will surely appreciate this little effort which you will make.
In case you do not believe us, then drop a comment in the section below and check for the same. You might end up surprising yourself.
Read More- Quick Tips to Enhance the Performance of Linksys Router
