Recently we came across an issue reported by a Linksys extender user that says the user can not reset the Linksys extender. It just froze and can’t proceed further. If you have got a Linksys extender setup done at your home and are stuck with a similar issue, then use the troubleshooting hacks given in this very guide. We have penned down this article to efficiently get rid of the problem that you are experiencing right now.
Why to Reset Linksys Extender?
First of all, let us discuss why you may need to reset your Linksys range extender. Consider resetting the extender as the final resort. When you are left with no other option then only reset it. Resetting will delete the current settings from it and the factory settings get restored. You will have to reconfigure it all over again from scratch. Here are a few scenarios that put you in a situation to reset your extender:
If you have forgotten the admin password of your extender and can not log in, then you need to reset the extender to its default values.
When you are getting very poor performance from your extender and nothing helped to fix the issue then also resetting comes to the rescue.
In case you want a fresh start from your router then also you will need to restore the factory settings and reconfigure it.
How to Fix Linksys Extender Reset Issues?
Reboot the Extender
If you are stuck with the reset process and can’t proceed further then consider rebooting it once. You need to power it off first and wait for some time and then power it up again. After it is turned on, check if it is reset or not. If your extender is still running on the current settings and is not yet restored the default settings, then reset it again.
Before you reset your extender there is something that you must put into consideration:
1. Ensure Stable Power Supply
Your Linksys extender must be connected to a well-working power socket. A poor and fluctuating power supply to the extender can never help you to reset your extender. Thus make sure that the extender is properly powered up and is receiving a non-fluctuating power supply before you reset it.
2. Disconnect the Connected Devices
Make sure that there are no devices connected to the network of your Linksys extender. Also, remove the Ethernet connection between the router and the wireless range extender.
3. Use the Correct Steps
Be very certain that you are using the correct steps to reset your extender. In case you miss out on something you may become a victim of the same issue one more time. Here is how you can reset your Linksys WiFi range extender:
- Check that the extender is disconnected from the host router.
- It should be properly powered up.
- Now, locate the Reset button on your extender. It usually is located inside a hole.
- Once you find it, use a sharp and pointed object to press it.
- Keep it pressed for a minimum of 10 seconds.
- Your Linksys extender will be reset to the factory settings.
Now you will need to set it up once again from the very beginning. You can use any method to get the task executed. There are two ways that you can use to set up your Linksys extender after it is reset:
- WPS Method
- Web Interface Method
Use any of these as per your convenience and set up your device once again. The WPS method wants you to press a single button to get the job done while the web interface method wants you to access the Linksys extender login page to complete the setup process.
The Final Note
We are very sure that the tips provided in this guide have been helpful in resolving the issue that you were stuck with. After you have reset your Linksys extender, set it up and connect various client devices to it and begin enjoying seamless internet access. Consider updating its firmware for the most recent version to avoid any issues so that you have to reset it once again.
