If you desire to add a touch of elegance and sophistication to your appearance then iron-on patches are a great option for you. No matter where you are placing your incredible badge whether it’s on your old denim jacket to make it look new or on any of your other valuable accessories, iron-on patches will help you to portray a unique and creative style.
Crafting your iron-on patches is a great option. Embroidery machines are expensive and buying ready-made patches is not a good option because of the limited options it offers.
There are three methods of creating your iron-on patches. First, you make an iron-on patch using flock heat transfer vinyl. Second, you can craft it on a scrap fabric and third combine these two techniques.
So, you don’t know how to craft a patch on your own? Don’t worry! In this blog, we will help you learn the complete process of how to make your iron-on badges. We have also mentioned the technique on how to place a patch on your desired fabric or garment. So, let’s begin with the process.
Techniques Of Making Iron-On Patches
Technique #1: Scrap Fabrics
These types of Custom Iron On Patches are best if you want a thick and one-color patch. They also work great if you want to fix a hole in your existing clothes. Let’s see what supplies are required to make this type of patch.
Important Supplies
1. Scarp fabric
2. Pins
3. Glue
4. Scissors
5. Felt fabric
6. Cutting machine or knife
7. Pressing cloth
8. Iron-on adhesive
9. Iron
Step-By-Step Process Of Crafting A Patch
1. Print out your desired design on a piece of paper.
2. Cut the design without any black space with the help of scissors.
3. Pin the design on the fabric and start cutting the fabric too.
4. Once you are done with the cutting remove the pins and add glue on the back of the design.
5. Now, glue the design on the back of the felt fabric.
6. It’s time to cut a heat bond and make sure it’s bigger than the design of the fabric badge.
7. Apply the adhesive side of the heat bond at the back of the patch.
8. Put an extra fabric on top of the heat bond adhesive and start pressing it with the help of iron.
9. Wait to cool it down when the glue is attached to the patch completely.
10. After the patch is cool cut the extra spaces of heat bond adhesive and felt paper using scissors or a knife.
11. Finally, peel the plastic backing of the heat bond adhesive.
Technique #2: Vinyl Iron-On Patch
If you desire to create a patch of multiple colors then, this technique is best.
Important Supplies
1. Cutting machine( circuit or silhouette)
2. Iron
3. Measuring ruler or tape
4. Fabric of your choice
5. Heat transfer vinyl
6. Thin fabric
7. Tweezers
8. Knife or thermal tape
Step-By-Step Process Of Making A Vinyl Iron-On Patch
1. Don’t limit yourself to picking the best design and heat transfer vinyl pattern of your choice. There are plenty of options and designs available that you can choose from.
2. You need to select the accurate design for your iron-on badge. If you are opting for a complicated design make sure it is not small in size. Vinyl patches look great on bigger sizes.
3. After choosing the right size it’s time to select colors. Start cutting the vinyl by colors. Use a cutting mat.
4. Copy and paste your desired design.
5. Select ungroup by clicking right in the design space.
6. Now select Weld to cut the dominant hues.
7. Once you are done with the color-cutting it’s time to prepare a layer on the design.
8. Keep all the cut layers of vinyl and ensure they fit like a puzzle.
9. Pre-press the fabric.
10. Now start pressing layers of vinyl on it one by one.
11. Make sure you let the first layer cool down completely before you jump to the second one.
12. It is important to align all layers before pressing it.
13. You can also use a thin sheet while ironing.
Technique #3: Combine Both Methods
This is a clever technique that every crafter should know. You can combine these techniques to get an exceptional patch. For instance, if you want to cover a hole in your denim jeans and you desire to cover it with a vinyl transfer patch. However, you cannot because the vinyl transfer technique only works on flat surfaces.
So, the best approach is to combine both of these techniques. Print transfer vinyl on a scrap fabric. This will help you cover your hole with the multi-layered patch. Let’s see how you can do this.
Step-By-Step Guide
1. Press the heat transfer vinyl on your scarp fabric.
2. Place iron-on adhesive below the fabric.
3. Start pressing the back portion of the fabric.
4. Finally, press your patch on your garment at the desired location.
Now, you have a beautiful multi-color patch on your jeans.
Do you still think making your patch is quite difficult? Relax, you still have multiple options for Custom Patches Australia to get your favorite patch without being worried about the quality.
Frequently Asked Questions
1. Which material is best for iron-on badges?
Cotton is a highly preferred fabric for your iron-on badges. This fabric blends the best for your patch.
2. Why does the iron-on patch lose its sticking?
Make sure that you have applied your patch to an even surface. Also, iron the patch until it sticks perfectly so, it will not lose its sticking.
3. Are iron-on patches difficult to make?
No, they are super easy to make. You can easily create your unique iron-on badge. You simply have to take your fabric and draw your desired design on it. Choose the method that you want embroidered or zigzag stitch. Once you are done with teh design cut it in accurate size.
4. How long do iron-on badges last?
If taken good care these patches can last for 2 to 3 years. It depends on how much you look after your patch after placing it on the garment.
Let Us Conclude
Custom iron-on patches are a creative and fun way to create. You can customize your clothes and other valuable accessories with the help of these exquisite patches. You can make your jackets, jeans, hats, and bags look more appealing by placing patches on them. This will help you to express your fashion sense and unique style.
