Netgear WiFi range extender is a popular device used nowadays. It helps people to extend their home network all over the house, even in areas where WiFi doesn’t reach well. But, like other networking devices, this extender can also have some technical problems. Recently, many users have been experiencing an issue where the Netgear extender’s WiFi keeps cutting out. Because of this, they can’t access a website called mywifiext.net.

If you’re going through the same problem and need help, you’ve come to the right place. In this blog, we will give you simple tips to fix this issue. But before that, let’s talk about the reasons why this WiFi disconnection problem happens. Understanding the reasons will help you solve the issue quickly.

Reasons: Netgear Extender WiFi Keeps Disconnecting

Here are the main reasons why you might face the problem of WiFi disconnecting frequently.

Interference

Wireless signals can be affected by interference from other electronic devices, neighboring WiFi networks, or physical obstacles like walls and appliances. Make sure the extender is placed in a location with minimal interference.

Outdated Firmware

Ensure that both your Netgear extender and main router are running the latest firmware versions. Outdated firmware can lead to compatibility issues and unstable connections.

Overheating

If the extender is overheating, it may cause performance problems, including frequent disconnections. Ensure the extender is placed in a well-ventilated area and not covered by objects that may trap heat.

Power Fluctuations

Inconsistent power supply or electrical issues can affect the extender’s stability. Try plugging the extender into a different power outlet or using a surge protector.

Network Overload

If there are too many devices connected to the extender simultaneously, it can overload the network and cause disconnections. Consider limiting the number of connected devices or upgrading to a more powerful extender.

Thus, these are the reasons that force you to face this WiFi keep disconnecting issue. But, you don’t need to worry because this can be fixed easily by implementing the further mentioned troubleshooting tips.

Fix: Netgear Extender WiFi Keeps Cutting Out

To resolve the issue, you can try the following steps:

Reboot Your Netgear Extender

The very first thing you need to do is reboot the Netgear extender to fix the minor bugs and remove the technical glitches. Below we give the instructions to restart the device properly:

• First, press the power button to turn off the device.
• Second, remove the extender from the wall outlet.
• Third, wait for some minutes until the device recovers from temporary hiccups.
• Fourth, plug the extender back into the working wall outlet and turn on it.

Now your device has been rebooted successfully.

Place the Extender in Right Place

Now you should check the location of the Netgear extender. If you see your extender place far away from the host router, then try to close the device. Because due to excessive distance devices do not communicate properly, so keeping them closer is the best way to make a strong connection.

Update Firmware on the Extender

As we already mentioned above outdated firmware causes issues in the Netgear extender. So, we suggest you check the firmware version of your device. Maybe you use outdated firmware. To check the firmware access the defaults IP address 192.168.1.250. In case the firmware of the device is outdated, then update it at the same time to fix the issue.

Remove the WiFi Interference

To remove the wireless interference from the Netgear extender follows the following steps:

• Try to keep the extender away from home appliances like speakers, smart TV, microwave, and many more. These devices have electromagnetic waves that cause wireless interference.
• Also, place the device at the center of the device so that it spread the network throughout the house properly.
• Avoid placing the extender on the floor.

Hence, these are the hacks that you can use to fix the WiFi keep disconnecting issue in a hassle-free manner. If the problem continues despite trying these steps, perform the reset process.