Are you not happy with the performance of your Linksys router ever since you set it up using myrouter.local? There are many users like you who have similar issues. A poor WiFi connection can be due to many reasons that you might have ignored while setting up and after the setup is done. But the good news is that there are ways that can help you out in this. Want to know about them? For that, you need to give this article a thorough read. Without any further delays, let’s begin!
How to Enhance the Linksys Router Performance?
1. Update Its Firmware
Getting the firmware of your router updated to the most recent version is necessary to get the maximum benefit from it. You must not have updated your router and hence getting poor WiFi. But better late than never. You can get the updates done on your router right now. Thus, download the latest firmware file on your PC first and then log in to your router and reach its settings. Here you can install the firmware file easily. Once your Linksys router is updated, you will notice an improvement in its WiFi signals for sure. Bear in mind that firmware updates are released on a regular basis. You need to have a check on them. Whenever there is an update ready, get it installed right away.
2. Make Wired Connection
Wired connections are always better than wireless ones. We recommend going for wired connections now and improve your network. You can use an Ethernet cable (RJ 45) to connect the Linksys router to the modem. Make sure the connection is solid. You must use the Internet port on the router and the LAN port on the modem to make the connection. With a wired connection, there are fewer chances of signal wastage.
3. Find a New Location for Router
The place where you kept your router plays a vital role in deciding the quality of WiFi signals that you will receive from it. Thus choosing a good location for your router is essential. For instance, if the router and the modem are connected wirelessly, then you must keep the router within the boundary line of the modem’s network.
Apart from this, you must choose an open and airy location in the home. Since the WiFi signal travels outwards and downwards, it is necessary that you place your router higher so that the signal does not get wasted. Keeping the router away from reflexive surfaces like mirrors, and heavy building materials like timber walls, etc is suggested. Moreover, keep it far from large water bodies like fish tanks, swimming pools, etc.
4. Eliminate Signal Interference
Many devices or appliances in our homes have the ability to interfere with WiFi signals. If your Linksys router is sharing its location with any such devices then the signals get affected. They might even get blocked sometimes. So, make sure that devices like Bluetooth speakers, microwave ovens, smart TVs, cordless phones, etc are not kept near the router.
5. Position Antennas Wisely
If your Linksys router has adjustable antennas then you need to change their positioning. Move the antennas and point them toward the connecting devices. Maintain a clear line of sight between the router and the connecting devices to have better signals.
6. Get a Wireless Extender
All of the above-mentioned hacks require only manual hard work. The last one in the list that needs you to spend some money can be followed if the above tips haven’t been of much help. Sometimes, the build of the home is so that it has multiple rooms and many walls. These walls and objects can obstruct the signal and nothing much can be done to improve the signal. In such scenarios, you can consider investing in a WiFi extender. An extender helps to extend the existing signal to reach far-off areas of the home improving its network range. So get Linksys wireless extender setup done and have an enhanced and improved WiFi network throughout your home.
Verdict
Once you are done following the tips and tricks given in this very article, the network quality will drastically improve in your home. We are sure you will have an enhanced internet experience by giving these tips a try.
Read more- Netgear Extender Not Showing 5GHz Band
