Regardless of the Netgear router model which you are using, it has LED lights located on it. And if even one of the LED lights is blinking orange, then you are in trouble. To change the color from orange to green, it is recommended that you walk through the troubleshooting tips mentioned in this article. You should know that a few of them might require you to access the routerlogin.net setup wizard. Thus, keep the username and password of the router handy in order to access the wizard when needed. Continue reading.
[Fixed] Nighthawk Router Orange Light Issue
Reason 1: Technical Glitches
The biggest factor that might have contributed to the Netgear router orange light issue is the existence of technical glitches. In order to get rid of these glitches, the easiest thing to do is to restart or reboot your networking devices.
The same can be done if you walk through the step-by-step instructions given here:
-
Turn off the Netgear router, the existing modem, and even the computer.
-
Wait for some time, approximately 30 seconds to 5 minutes.
-
Once the wait is over, turn on all the devices mentioned above.
Make the required connections, and check if you are still experiencing the Netgear router orange light issue. If you are, then it is suggested that you make your way to the next tactic given in this article.
Reason 2: Interrupted Power Supply
Another reason why the LED light on your Netgear router is blinking orange is that the power supply is interrupted. In simple words, your router is not receiving an uninterrupted power supply from its wall socket.
This might be because either the power cable is worn out or the wall socket is damaged. In both cases, you need to call up an electrician and ask him to repair the wall socket. In case, this does not bear fruit for you, then consider plugging your wireless router into another wall socket in your home. Make sure that it is in the same room where the router is kept.
Reason 3: Weak Ethernet Connection
Are you still not able to troubleshoot the Netgear router orange light issue? Well, then might be because the Ethernet connection is weak. The connection might be weak because the cable in use has cuts in or on it.
Taking this into consideration, tape up the cable. Once that is done, see if the flashing of the orange light stops. By any chance, if it does not, then use another cable to connect the networking devices. Ensure that the connection you are making is finger-tight. Apart from this, the ports on both devices should not be damaged. Otherwise, even using a new cable will turn out to be useless for you.
Reason 4: Corrupted Firmware
When was the last time you updated the firmware of your Netgear wireless router? Was it a few days ago? What happened? Did it get corrupted? Well, that might be because you entered the wrong model number when it was needed.
In this case, update the firmware of your networking device again. This time, make sure that you fill in the correct model number. In case you want to be sure of it, then refer to the user manual of your router. Surely the information given there will help you out.
Reason 5: Impartial Setup
In case none of the aforementioned hacks help you to resolve the Netgear router orange light issue, then it is recommended that set up your networking device again. You can do so with the help of three methods, the WPS method, the manual method, Nighthawk app.
But, before you set up your device again, you need to reset it. This can be done if you hold and press the Reset button for a few seconds using an oil pin. Resetting the device will restore your networking device to its default factory values.
Conclusion
These were some of the best ways in which the Netgear router orange light issue can be resolved. We hope that after following the solutions given in this post, you will easily be able to convert the status of the LED from orange to green. If you do, do not forget to share your feedback