Executing the Netgear Orbi firmware update process is needed in case you are interested in enjoying an enhanced performance of your networking device. But, what is that? Were you already aware of this and tried to update the firmware of the Orbi device via orbilogin.net but failed? Well, that is troublesome.
But, the good thing is that we can help you. In this article, we have outlined the reasons and the solutions via which you will be able to come out of this mess. Given this, keep reading.
What Forced Netgear Orbi Firmware Update to Fail?
1. Wrong Instructions Followed
The topmost reason why you are finding it hard to complete the Netgear Orbi firmware update process is that you followed the wrong instructions, even when you were referring to the user manual of the device. Another possibility could be that you skipped one or two steps amidst the process.
2. Incorrect Version Downloaded
Another reason why you are in this mess is because you ended up downloading the wrong firmware version for your Netgear Orbi router. Perhaps, when it was needed for you to enter the serial or model number of your device, you entered the wrong one which did not match the actual number, hence, the reason why you are here.
3. Unstable Internet Connection
There could be two factors why a weak internet connection is stopping you from updating the firmware of your Netgear Orbi router. Number one, your Internet Service Provider is not properly working and number two, the Ethernet cable connecting the networking devices is either damaged or worn out.
[Fixed] Netgear Orbi Firmware Update Failed Issue
1. Follow the Correct Guidelines
To commence with the troubleshooting process, you need to try to update the firmware of your Netgear Orbi again by referring to the guidelines given in the user manual. This time, do not forget to follow every step. For your information, in the manual, you can also gain knowledge regarding various Netgear Orbi satellite colors.
Although after following this troubleshooting this tip, you will be able to resolve the Netgear Orbi firmware update failure issue, by any chance, if you are stuck with the same, then you should not waste any more time reading the next tip in line. We are hoping that it might help you to update the firmware of your device with ease.
2. Download the Right Version
Whether you are using the manual method or the Orbi app to update the firmware, you will be asked to enter the model number of your device during the process. And if not entered right, you will never be able to update the firmware of your device. In view of this, you need to enter the right model or serial number.
In case you are skeptical about making mistakes, then it is suggested that you have a look at the label of your wireless device. And there it is; you will find the number of your model. Make use of it and get down to updating the firmware of your networking device to its most recent or latest version right away.
3. Check the Internet Connection
In case none of the tips given above in this article helped you to resolve the Orbi firmware update failure issue, then your last resort is to call up your Internet Service Provider and ask him to fix things from his end. By any chance, if this does not work for you, then you ought to check the Ethernet cable connecting the router and modem right away.
Any damages found? Well then, you should replace the existing cable with a new one. Ensure that it is a non-damaged one. Apart from this, the connection which you will be establishing should not be loose. Otherwise, instead of fixing the issue at hand, you will end up inviting more technical issues to the table.
Conclusion
With that, we are concluding the article based on the tips to resolve the Netgear Orbi firmware update failed issue. We hope that now you will be able to update the firmware of your networking device in a hassle-free manner. While walking through the information given above, did you figure out some other tip through which the same issue can be fixed?
In case you did, then feel free to share it with your fellow readers. You can do the same with the aid of the comment section located below.
