The Netgear extender slow WiFi connection issue is faced by various users these days who own Netgear wireless range extenders. In case you are one of them, then one of the reasons why you are experiencing it is because you did not perform new extender setup properly. Apart from this, there are plenty of other reasons why one might face this issue.
However, focusing on the reasons will do you no good, learning about the solutions will. Taking this into consideration, it is recommended that you read the fixes mentioned in this article and learn how to enhance the speed of the Netgear extender network.
[Fixed] Netgear Extender Slow WiFi Connection Issue
1. Restart the Netgear Extender
Prior to making your way to any other troubleshooting tips, restart your Netgear wireless range extender. The process can be executed if you power off the extender, disconnect it from its wall socket, wait for some time, connect it back to its socket, and power it back on.
As soon as you are done restarting your device, see if the Netgear extender slow WiFi connection issue is fixed. In case, you are still experiencing it, then it is suggested that you read the tips given further in this article. One of them will surely help you out.
2. Change the Connection Source
Another reason why you are a victim of the Netgear extender slow WiFi connection issue is because you have used a wireless source of connection to connect the range extender to the host router. You should know that it was not a good decision.
We are saying this because a wireless source is not reliable as compared to a wired source. Taking this into account, you need to change the source from wireless to wire. In simple words, you need to use an Ethernet cable to pair the networking devices.
Now, you might be wondering how to do so. Well, connect one end of the cable to the port of the extender and another to the port of the router. Make sure that you are only establishing a finger-tight connection. Leaving the connection loose will take you nowhere.
3. Reduce the Unwanted Distance
Too much distance between the networking devices can make it next to impossible for their signals to get propagated. In view of this, if the distance between the extender and router is too much, then you should reduce it.
See to it that the Netgear wireless range extender is placed in the same room where the host router is kept. But, at the same time, they should not be kept neck to neck as their signals can clash and lead to more technical issues in the future.
4. Install the Extender Again
Despite following the troubleshooting tips mentioned above, if you still have got your knickers in a twist because of the Netgear extender slow WiFi connection issue, then you should install the extender via mywifiext.net again.
In case you come across the www mywifiext net refused to connect issue while trying to do so, then take our advice and use the default IP address to log in and set up your device. Also, if you are not interested in using this method, then you can use another method.
The remaining two methods that can be used to install the extender are the WPS button and the Nighthawk app. To know more about each method, it is highly recommended that you walk through the guidelines mentioned in the Netgear user manual.
In Conclusion
Troubleshooting the Netgear extender slow WiFi connection issue is quite a daunting task for users. Considering you are one of them, we hope that the hacks mentioned above helped you to improve the speed of your device. In case you are still not able to get rid of the same issue, then reset your extender.
Also, if you are acquainted with any other method through which the issue can be fixed, then take this opportunity and share it with your fellow readers. You can do this by using the comment section. We are anticipating that your fellow readers will like this effort made by you. If you do not believe us, drop a comment below and see for yourself.
