Water filter taps are an efficient way to get access to clean drinking water directly from your sink. Also, a water filter tap is a great space saver, requires less effort to maintain, and is slick since there is no need for bulky water gallons–making your kitchen look great all the time.
Apart from it being a convenient option for a drinkable water source, this is also easy to install and is a great investment to consider in the long run. How this produces clean drinking water straight from the tap by filtering out the common pollutants found in tap water like lead, microorganisms, metals, and more.
The only thing you need to do every once in a while is clean it to ensure the water it filters is clean and safe to drink. To give you an idea of how water filter taps are commonly cleaned, below is a step-by-step guide to help you out:
Step 1: Get and gather everything you’ll be needing
To make the job easy and swift, get and gather everything you’ll need to clean your water filter tap. This is to prevent any pauses or delays when cleaning and get the job done as soon as possible.
Common things you’ll be needing are a cleaning cloth, a sponge, mild dish soap, a soft-bristled brush, white vinegar and clean paper towels. You can also add or replace products you trust and use for these types of cleanings.
Step 2: Turn off your water supply
Before unassembling anything, you must turn off your water supply first to prevent water wastage and leaks during the cleaning procedure. You can either turn off your main water supply or simply close the valves clearest to your water filter tap.
Step 3: Start assembling the water filter tap components
After turning off your water supply, it’s now time to detach your water components. So start by doing the small attachments first then the big ones. An order you can follow is (1) detach the aerator or nozzle by unscrewing them, (2) then bigger parts. Then set them aside to be cleaned later on.
Step 4: Start cleaning the tap exterior
Use a gentle sponge or towel and moisten it with mild dish soap to begin cleaning the outside of your water filter tap. Without harming the finish, this mild solution will assist in removing dirt and grime. Start by giving the tap a thorough cleaning, making sure to get into all the nooks and crannies as well as the handles and base.
Any spots where stains or deposits have developed over time should be closely inspected. Apply a little extra pressure to these harder areas and gently scrape as needed, taking care not to damage the surface. Giving your tap this thorough cleaning will guarantee its durability and best function in addition to maintaining its aesthetic.
Step 5: Clean your detachable components
Now you can start cleaning the parts you set aside earlier. It’s best to start by immersing the detachable parts of your faucet, such as the nozzle or aerator, in a solution of warm water and mild dish soap to completely clean them. This mixture works wonders to remove and release mineral deposits, filth, and grime that have collected over time.
For the solution to fully penetrate and soften any tough buildup, let the components soak for a few minutes up to an hour. Then, arm yourself with a little brush with delicate bristles that is perfect for this use. Scrub the submerged parts gently, being careful not to get into the cracks and hard-to-reach places where debris usually hides.
The gentle bristles assist in removing any tenacious debris without affecting the surface. After giving every part a good scrub, give them a quick rinse under fresh water to get rid of any soap residue.
Making sure no soap residue remains is a must since it may have an impact on your water filter tap’s functionality. Check every part after rinsing to make sure it’s clean and clear of any leftover residue. By following this thorough cleaning procedure, you’ll ensure that your faucet lasts for many years and keeps working at its finest while also preserving its functionality.
Step 6: Descale tap
If after the rinse, there are still stains, mineral deposits and build you can proceed with this step. Wrap the afflicted parts with a cloth or paper towel that has been soaked with white vinegar. To remove the mineral deposits, let the cloth soaked in vinegar remain for fifteen to thirty minutes. Next, use a moist towel to thoroughly clean the area.
Step 7: Flush your filter tap system
Restart the water supply, then flush away any leftover residue or vinegar solution by running cold water down the filter tap for a couple of minutes. This makes it easier to guarantee that the water coming from the faucet is pure and devoid of any cleaning products.
Step 8: Reattach tap components
Once the tap and its parts have been cleaned and allowed to air dry completely, it’s time to put them back together. Make sure that every component is reattached firmly during this stage to avoid any future leaks or errors.
Make sure the parts fit together tightly and in the right direction by first accurately aligning them. If any gaskets or seals need to be correctly installed to preserve the integrity of the faucet, pay special attention to those.
Step 9: Check if your water filter tap is leaking
Make sure everything is operating as it should after putting together your faucet by giving it a thorough inspection. Start by turning on your water filter tap and be wary of the tap and its connections. You can find any possible leaks during the reassembly process by following this step.
Step 10: Final polishing
When you’ve finished reassembling and leak-checking your faucet, it’s time to polish it to make sure it appears brand new. Take a fresh, dry cloth and use it to thoroughly clean the whole tap. This last stage guarantees a polished surface that improves the look of your water filter tap and helps to eliminate any residual moisture.
